Pressure Vessel Steel Plate

India : Search for Pressure Vessel Steel Plate :: Find Quick Results now! Great Offers on Pressure Vessel Steel Plate. Best Prices + Quality . Call Now! +91-98332 30273 :: Quality collection of Pressure Vessel Steel Plate available at Simplex Metal::Cost Effective Pressure Vessel Steel Plate Available in Different Specification :: Good Price on Pressure Vessel Steel Plate; Email Us : satish@simplexmetal.com, exports@simplexmetal.com

Pressure Vessel Steel Plate Varieties
Pressure Vessel Plate ASME SA516 Gr. 70
Pressure Vessel Plate EN 10028:3 P355NL1 and P355NL2
Pressure Vessel Plate BS 1501 224 490B LT50
Pressure Vessel Plate BS 1501 223 490B LT30
Pressure Vessel Plate BS 1501 225 490B LT50
Pressure Vessel Plate EN 10028:3 P355NH
Pressure Vessel Plate ASME SA537 Class 1 and ASTM A537 Clas
Pressure Vessel Plate ASME SA516 Grade 65 and ASTM A516 Grad

Pressure Vessel Steel Plate Varieties

:: Plate Packing :: Factory Tour

Pressure Vessel Steel Plate
Pressure Vessel Steel Plate

Pressure Vessel Steel Plate Varieties Plate

 

The technical specifications available from stock are:

ASME SA516 Gr. 70 

ASTM A516 Gr. 70 

EN 10028-3 P355NH 

EN 10028-3 P355NL1 

EN 10028-3 P355NL2 

BS 1501 223 490B LT30 

BS 1501 224 490B LT50 

BS 1501 225 490B LT50 

ASME SA537 Class 1 

ASTM A537 Class 1 

ASME SA516 Gr. 65 

ASTM A516 Gr. 65 

ASME SA516 Gr. 60 

ASTM A516 Gr. 60 

EN 10028-3 P460NH

EN 10028-3 P460NL1

EN 10028-3 P460NL2 

 

Not only do we consider ourselves specialists in pressure vessel plate and its processing but we are proud to confirm that, unlike some other steel companies, all of the grades indicated above are genuine product lines that are always in stock

 

Pressure Vessel Plate Stock Size Range

Thickness:

From 3 mm to 200 mm 

Width:

From 2,000 mm to 4,000 mm

Length: 

Up to 20,000 mm 

 

Pressure Vessel Plate ASME SA516 Gr. 70

 

The A516 / SA516 standard, its full name is “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, could almost be described as the default material specification for pressure vessel applications particularly outside of Europe and it is widely used by designers and engineers in many market sectors. You may also see the following variations:

ASTM A516 Gr. 70N or ASME SA516 Gr. 70N – the “N” is added to show that the steel is normalised

ASTM A516M or ASME SA516M – the “M” indicates that the material is certified in metric units

ASME SA516 Gr. 70 / ASTM A516 Gr. 70 - the specification

Despite its wide use and application, A516 / SA516 is a remarkably straightforward standard in its basic form with just five key chemical elements specified along with three mechanical properties. It does not even need to be heat treated in any way.

Chemical Requirements
 
Element
 
Thickness
 
Composition (%)
 
Note
 
Carbon (max)
 
12.5 mm and under
 
0.27
A, B, C 

 

 over 12.5 to 50 mm

 0.28

A, B, C

 

 over 50 to 100 mm

 0.30

A, B, C 

 

 over 100 mm

 0.31

A, B, C 

 Manganese

 

 0.85 - 1.20

A, C

 

 

 0.79 - 1.30

B, C

 Phosphorus (max)

 

 0.025

A, B 

 Sulphur (max)

 

 0.025

A, B 

 Silicon

 

 0.15 - 0.40

 

 

 0.13 - 0.45

B

 Mechanical Property

 Value

Tensile Strength, MPa (ksi) 

485 - 620 (70 - 90) 

Yield Strength, min MPa (ksi)

260 (38) 

Elongation min, % 200 mm (8 in)

17 

Elongation min, % 50 mm (2 in) 

21 


 

Pressure Vessel Plate EN 10028:3 P355NL1 and P355NL2

EN 10028:3

The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes. It has three steel grades (P275, P355, and P460) which indicate each grade’s minimum yield strength (in MPa) for plates 16 mm thick and below. These are further subdivided on the basis of impact testing (transverse) temperature: N and NH indicate impact testing at -20 deg C or above, NL1 at -40 deg C or above, and NL2 at -50 deg C or above.

The designation EN 10028:3 P355NL1 shows that this is steel for pressure purposes (P) with minimum yield strength of 355 MPa (355) which is impact tested in the transverse direction at -40 deg C (NL1). EN 10028:3 P355NL2 follows the same pattern but is impact tested at -50 deg C.

P355NL1 and P355NL2 compared

The differences between P355NL1 and P355NL2 can be seen in the tables below but are summarised as follows:

Chemistry: P355NL2 has a more tightly controlled Phosphorus and Sulphur content

Mechanical Properties: P355NL2 has higher required impact values at all specified temperatures and in both longitudinal and transverse directions. It also specifies requirements for transverse impact testing at -50 deg C

As well as P355NL1 and P355NL2, we are also stockists of plates manufactured and certified to:

EN 10028:3 P355NH         EN 10028:3 P275NH        EN 10028 P460NH

EN 10028:3 P460NL1        EN 10028:3 P460NL2

Chemical Requirements (cast analysis, % by mass, maximum permitted unless indicated otherwise)

Grade  C Si  Mn  Altotal   N Cr 
P355NL1 0.18  0.50 1.10-1.70  0.025 0.008 0.020 min 0.012  0.30 
P355NL2  0.18  0.50  1.10-1.70  0.020 0.005 0.020 min 0.012  0.30 
 















 


Pressure Vessel Plate BS 1501 224 490B LT50

BS 1501 224 specifies requirements for fully killed aluminium treated carbon manganese steel plates up to 150 mm thick in four grades which relate to minimum tensile strength. The plates may also be supplied having specified elevated temperature properties and low temperature impact properties. Plates are supplied in the normalised condition unless an alternative is agreed between supplier and purchaser.

BS 1501 224 490B LT50 - the specification

The grade BS 1501 224 490B LT50 shows that the steel will have a minimum tensile strength of 490 N/mm2 (490), has elevated temperature properties reported (B), and has low temperature impact properties specified at -50 deg C (LT50).

As well as BS 1501 224 490B LT50, we are also stockists of plates manufactured and certified to:

BS 1501 223 490B LT30                    BS 1501 225 490B LT50

Chemical Requirements Chemical composition (ladle analysis, %) of steel 224

 

C Si  Mn  S 
0.22 max 0.10 - 0.40  0.90 - 1.60  0.030 max 0.030 max
Al (metallic) Cr* Cu* Mo*  Ni 
0.015 min 0.25 max 0.30 max 0.10 max 0.75 max

Tensile Requirements

Plate Thickness
Tensile Rm
Yield Re
Elong. A
over 3 mm to 16 mm 
490 - 610 N/mm2 
325 N/mm2 min
21% min 
over 16 mm to 40 mm 
490 - 610 N/mm2 
315 N/mm2 min 
21% min 
over 40 mm to 63 mm 
490 - 610 N/mm2 
305 N/mm2 min
20% min 
over 63 mm to 100 mm 
490 - 610 N/mm2 
*
19% min 
over 100 mm to 150 mm 
490 - 610 N/mm2 
19% min 

 

Pressure Vessel Plate BS 1501 223 490B LT30

The grade BS 1501 223 490B LT50 shows that the steel will have a minimum tensile strength of 490 N/mm2 (490), has elevated temperature properties reported (B), and has low temperature impact properties specified at -30 deg C (LT30).

As well as BS 1501 223 490B LT30, we are also stockists of plates manufactured and certified to:

BS 1501 224 490B LT50                    BS 1501 225 490B LT50

Chemical Requirements Chemical composition (ladle analysis, %) of steel 223 Grade 490

 

C Si  Mn  S 
0.20 max 0.10 - 0.50  0.90 - 1.60  0.030 max 0.030 max
Nb Cr* Cu* Mo*  Ni 
0.01 - 0.06 0.25 max 0.30 max 0.10 max 0.75 max

Tensile Requirements

Plate Thickness Tensile Rm Yield Re Elong. A
over 3 mm to 16 mm  490 - 610 N/mm2  355 N/mm2 min 21% min 
over 16 mm to 40 mm  490 - 610 N/mm2  345 N/mm2 min  21% min 
over 40 mm to 63 mm  490 - 610 N/mm2  340 N/mm2 min 20% min 
over 63 mm to 100 mm  490 - 610 N/mm2  * 20% min 
over 100 mm to 150 mm  490 - 610 N/mm2  20% min 
Charpy V-notch impact values

Impact test values, average of three at tempereature specified below

RT
0oC 
-15oC 
-30oC 
61 J min
55 J min 
41 J min 
27 J min 

 


Pressure Vessel Plate BS 1501 225 490B LT50

BS 1501 Grade 225 specifies the requirements for fully killed niobium and aluminium treated carbon manganese steel plates up to 150 mm thick in two grades. The plates may be supplied having specified low temperature impact properties and elevated temperature properties.

The grade BS 1501 225 490B LT50 shows that the steel will have a minimum tensile strength of 490 N/mm2 (490), has elevated temperature properties reported (B), and has low temperature impact properties specified at -50 deg C (LT50).

As well as BS 1501 225 490B LT50, we are also stockists of plates manufactured and certified to:

BS 1501 223 490B LT30                   BS 1501 224 490B LT50

Chemical Requirements Chemical composition (ladle analysis, %) of steel 225 Grade 490

 

C Si  Mn  S   Nb
0.20 max 0.10 - 0.50  0.90 - 1.60  0.030 max 0.030 max  0.01 - 0.06
Al (metallic) Cr* Cu* Mo*  Ni*  
0.015 min 0.25 max 0.30 max 0.10 max 0.75 max  

Tensile Requirements

Plate Thickness Tensile Rm Yield Re Elong. A
over 3 mm to 16 mm  490 - 610 N/mm2  355 N/mm2 min 21% min 
over 16 mm to 40 mm  490 - 610 N/mm2  345 N/mm2 min  21% min 
over 40 mm to 63 mm  490 - 610 N/mm2  340 N/mm2 min 20% min 
over 63 mm to 100 mm  490 - 610 N/mm2  * 20% min 
over 100 mm to 150 mm  490 - 610 N/mm2  20% min 
Charpy V-notch impact values

Impact test values, average of three at temperature specified below

-20oC  -30oC   -50oC
61 J min  47 J min   27 J min

 

Pressure Vessel Plate EN 10028:3 P355NH

The specification EN 10028:3 covers a range of weldable fine grain steels supplied in the normalised condition and intended for pressure purposes.EN 10028:3 P355NH is steel for pressure purposes (P) with minimum yield strength of 355 MPa (355) which has specified elevated temperature properties (NH).

As well as P355NH we are also stockists of plates manufactured and certified to:

EN 10028:3 P355NL1    EN 10028:3 P355NL2         EN 10028:3 P275NH

EN 10028:3 P460NL1    EN 10028:3 P460NL2         EN 10028:3 P460NH

Chemical Requirements (cast analysis, % by mass, maximum permitted unless indicated otherwise)

 

C Si  Mn  Altotal   N Cr 
0.18  0.50 1.10-1.70  0.025 0.015 0.020 min 0.012  0.30 
Cu  Mo  Nb  Ni  Ti  Nb+Ti+V   
0.30  0.08  0.05  0.50  0.03  0.10  0.12   

Tensile Requirements

Product Thickness Yield Strength MPa Tensile Strength MPa  Elongation A%
up to 16 mm 355 min  490 to 630 22 min 
16 to 40 mm 345 min  490 to 630 22 min
over 40 to 60 mm 335 min  490 to 630 22 min
over 60 to 100 mm 315 min  470 to 610 21 min
over 100 to 150 mm 305 min  460 to 600 21 min
over 150 to 250 mm 295 min  450 to 590 21 min

 

Pressure Vessel Plate ASME SA537 Class 1 and ASTM A537 Class

We are also world-leading stockists and processors of other ASME and ASTM carbon steel pressure vessel plates manufactured and certified to:

ASTM A516 Gr. 70            ASME SA516 Gr. 70

ASTM A516 Gr. 65            ASME SA516 Gr. 65

ASTM A516 Gr. 60            ASME SA516 Gr. 60

ASTM / ASME A / SA 516 Gr. 60 / 65 / 70 HIC

The A537 / SA537 standard, its full name is “Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel”, is intended use in the manufacture of fusion welded pressure vessels and structures.

The material under this specification is available in three classes. Class 1 steel is supplied in the normalised condition and the specification covers plates up to 100 mm (4 inches) in thickness.

ASME SA537 Class 1 / ASTM A537 Class 1 - the specification 

Chemical Requirements
 Element  Thickness  Composition (%)  Note
 Carbon (max)    0.24 A, B
 Manganese  40 mm and under  0.70 - 1.35 A, C
   40 mm and under  0.64 - 1.46 B, C
   Over 40 mm  1.00 - 1.60 A, C
   Over 40 mm  0.92 - 1.72 B, C
 Phosphorus (max)    0.035 A, B 
 Sulphur (max)    0.035 A, B 
 Silicon    0.15 - 0.50
     0.13 - 0.55 B
 Copper (max)    0.35
     0.38 B
 Nickel (max)    0.25 A, C
     0.28 B, C
 Chromium (max)    0.25 A
     0.29 B
 Molybdenum (max)    0.08 A
     0.09 B

Tensile Requirements

Mechanical Property
 
Value
Tensile Strength, MPa (ksi) 
485 - 620 (70 - 90) 
Yield Strength, min MPa (ksi)
345 (50) 
Elongation min, % 200 mm (8 in)
18 
 

 

Pressure Vessel Plate ASME SA516 Grade 65 and ASTM A516 Grad

The A516 / SA516 standard, its full name is “Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service”, is widely used by designers and engineers in many market sectors particularly outside of Europe. You may also see the following variations:

ASTM A516 Gr. 65N or ASME SA516 Gr. 65N – the “N” is added to show that the steel is normalised

ASTM A516M or ASME SA516M – the “M” indicates that the material is certified in metric units

We are also stockists of plates manufactured and certified to:

                                ASTM A516 Gr. 60            ASME SA516 Gr. 60

                                ASTM A516 Gr. 70            ASME SA516 Gr. 70

ASME SA516 Gr. 65 / ASTM A516 Gr. 65 - the specification

The chemical and mechanical requirements of A516 / SA516 are very simple and these are listed below. Further complexity comes from additional supplementary requirements and end-user produced variations: needless to say, We are able to supply Grade 65 plates that will meet the most stringent specifications.

Chemical Requirements
 Element  Thickness  Composition (%)  Note
 Carbon (max) 12.5 mm and under  0.24 A, B, C 
  over 12.5 to 50 mm  0.26 A, B, C
  over 50 to 100 mm  0.28 A, B, C 
  over 100 mm  0.29 A, B, C 
 Manganese    0.85 - 1.20 A, C
     0.79 - 1.30 B, C
 Phosphorus (max)    0.025 A, B 
 Sulphur (max)    0.025 A, B 
 Silicon    0.15 - 0.40
     0.13 - 0.45 B

Tensile Requirements

 Mechanical Property  Value
Tensile Strength, MPa (ksi)  450 - 585 (65 - 85) 
Yield Strength, min MPa (ksi) 240 (35) 
Elongation min, % 200 mm (8 in) 19 
Elongation min, % 50 mm (2 in)  23 

Pressure Vessel Steel Plate Varieties Application

Pressure Vessel Steel Plate Pressure Vessel Steel Plate Pressure Vessel Steel Plate

Pressure Vessel Steel Plate Varieties Packing

Pressure Vessel Steel Plate Pressure Vessel Steel Plate Pressure Vessel Steel Plate


PLATES LATEST ONLINE PRICE ::

Alloy 100 XF Plate
US $800-1500 / Ton ( FOB Price)

Alloy A514 Plate
US $1000-3000 / Metric Ton ( FOB Price)

Alloy AR235 Plate
US $800-3000 / Metric Ton ( FOB Price)

Alloy 4130 Plate
US $570-1950 / Ton ( FOB Price)

Alloy 4140 Plate
US $800-1900 / Ton ( FOB Price)

Alloy 4340 plate
US $670-2850 / Ton ( FOB Price)

Alloy 8620 plate
US $680-1900 / Ton ( FOB Price)

High Strength Low Alloy Steel Plates
US $620-1280 / Ton ( FOB Price)

Alloy Quenched & Tempered Steel
US $880-2800 / Ton ( FOB Price)

Abrasion Resistant Steel Plates
US $1000-2100 / Ton ( FOB Price)

Pressure Vessel Steel Plate Varieties
US $700-1500 / Ton ( FOB Price)

Low / High Carbon Steel Plates
US $780-1900 / Ton ( FOB Price)

EN Standards Steel Plates
US $680-2800 / Ton ( FOB Price)

Abrasion and Wear Resistant Steel Plate
US $880-2800 / Ton ( FOB Price)

SA 387 Alloy Steel Plates
US $780-1800 / Ton ( FOB Price)

Boiler Quality Steel Plates
US $880-2200 / Ton ( FOB Price)

Corten Plates
US $780-1900 / Ton ( FOB Price)

Mild Steel Plates and Carbon Steel Plates
US $690-3200 / Ton ( FOB Price)

Stainless Steel Plates
US $1980-5800 / Ton ( FOB Price)